Description
Description / Overview
RE High voltage spark testers are designed for checking the quality of insulation coated wires for pin holes / weak insulation / exposed conductor during manufacturing at work floor. The wire is passed through brass ball beads which carry high voltage. If any pin hole is detected in PVC, a spark develops and electro magnetic counter counts the fault. The spark tester is necessary for every cable manufacturing unit. Spark Testers can be used for high speed extruders and high speed Recoiling processes. The efficiency of Spark Tester is up to 95%.
Special Feature
Special Features
- Designed for extruder and recoiling operations.
- Height adjustable Electrode box
- Compact size.
- Built in safety features for operators
- Easy to operate.
- Recoiling shutdown as per operator setting.
Accessories
Accessories
- Exit point cable earthing
- Cable supporting roll.
Tech Details
| AC High Voltage Power Frequency Spark Tester |
| Sr. No. |
Parameters |
Description |
| 1 |
I/p Voltage |
230/240 Volt 50 Hz. AC Supply, single phase |
| 2 |
Test Voltage |
Up 50KV |
| 3 |
Test Frequency |
50HZ |
| 4 |
Dia. Range |
Up to 150mm |
| 5 |
Line Speed |
300 m/min. |
| 6 |
KV Meter |
Analog or Digital display as required. |
| 7 |
Indicator |
a) LT ON
b) HV ON
c) HV OFF
d) Fault (Audio & Visual) |
| 8 |
Fault Counter |
Electro-Mechanical / Digital (resettable) |
| 9 |
Protection |
a) Input Fuse
b) Short circuit protected |
| 10 |
Duty |
Continous |
| 11 |
Control |
Trip or bypass available |
| 11 |
Electrode Box Length |
150 mm x 150mm x 350 mmlength |
| 12 |
Length beads path |
100 mm x 100 mm x 150 mm lengths |
